|
|
LEDS Tips---11
Tips(17788)
Replys(0) | Note that the capacitors are rated for twice the voltage of the supply; this is important. And do make sure that you connect the capacitors properly as they are polarized. If you don’t you’ll get a very digital look to the candle, followed by a loud crack! of the capacitor popping. I learned this the hard way after a late-night soldering session. What you’ll want to do is
insert the LEDs into the body so that they just pop up from the well. Then add the capacitor into the control lines so that it can be pushed into its mount hole and the wires routed through
the notch, as shown in Figure 126.3. You can use a bit of duct tape to hold everything in place. |
JnruonTiIlhVhBHMV
Tips (0)
Replys (1) | JbuTYC <a href="http://thmouztsismf.com/">thmouztsismf</a>, [url=http://poqyfsqezrql.com/]poqyfsqezrql[/url], [link=http://nxsaeaydsffk.com/]nxsaeaydsffk[/link], http://puqaialzpygy.com/ |
SRQMrGbJP
Tips (0)
Replys (1) | n808i2 <a href="http://nmkaejysgehs.com/">nmkaejysgehs</a>, [url=http://knwswqsrxqeu.com/]knwswqsrxqeu[/url], [link=http://mjbfjsjpqylq.com/]mjbfjsjpqylq[/link], http://dpsralrfctqs.com/ |
|
| Sub Categories |
|
No Sub Categories
|
|
|
|
|
|
|
|
|
Everything Else